Pentium 4 2.4 GHz vs Phenom II X3 720
Primary details
Comparing Phenom II X3 720 and Pentium 4 2.4 GHz processor market type (desktop or notebook), architecture, sales start time and price.
| Place in the ranking | 2463 | not rated |
| Place by popularity | not in top-100 | not in top-100 |
| Cost-effectiveness evaluation | 5.16 | no data |
| Market segment | Desktop processor | Desktop processor |
| Series | no data | Pentium 4 |
| Power efficiency | 0.99 | no data |
| Architecture codename | Heka (2009−2010) | Northwood (2002−2004) |
| Release date | 1 January 2010 (14 years ago) | no data (2024 years ago) |
| Launch price (MSRP) | $75 | no data |
Cost-effectiveness evaluation
Performance per price, higher is better.
Detailed specifications
Phenom II X3 720 and Pentium 4 2.4 GHz basic parameters such as number of cores, number of threads, base frequency and turbo boost clock, lithography, cache size and multiplier lock state. These parameters indirectly say of CPU speed, though for more precise assessment you have to consider their test results.
| Physical cores | 3 (Tri-Core) | 1 (Single-Core) |
| Threads | 3 | 1 |
| Base clock speed | 2.8 GHz | no data |
| Boost clock speed | 2.8 GHz | 2.4 GHz |
| Bus rate | no data | 400 MHz |
| L1 cache | 128 KB (per core) | no data |
| L2 cache | 512 KB (per core) | no data |
| L3 cache | 6 MB (shared) | no data |
| Chip lithography | 45 nm | 130 nm |
| Die size | 258 mm2 | no data |
| Number of transistors | 758 million | no data |
| 64 bit support | + | - |
| Windows 11 compatibility | - | - |
Compatibility
Information on Phenom II X3 720 and Pentium 4 2.4 GHz compatibility with other computer components: motherboard (look for socket type), power supply unit (look for power consumption) etc. Useful when planning a future computer configuration or upgrading an existing one. Note that power consumption of some processors can well exceed their nominal TDP, even without overclocking. Some can even double their declared thermals given that the motherboard allows to tune the CPU power parameters.
| Number of CPUs in a configuration | 1 | no data |
| Socket | AM3 | no data |
| Power consumption (TDP) | 95 Watt | 59.8 Watt |
Memory specs
Types, maximum amount and channel quantity of RAM supported by Phenom II X3 720 and Pentium 4 2.4 GHz. Depending on the motherboard, higher memory frequencies may be supported.
| Supported memory types | DDR3 | no data |
Peripherals
Specifications and connection of peripherals supported by Phenom II X3 720 and Pentium 4 2.4 GHz.
| PCIe version | 2.0 | no data |
Synthetic benchmark performance
Various benchmark results of the processors in comparison. Overall score is measured in points in 0-100 range, higher is better.
Passmark
Passmark CPU Mark is a widespread benchmark, consisting of 8 different types of workload, including integer and floating point math, extended instructions, compression, encryption and physics calculation. There is also one separate single-threaded scenario measuring single-core performance.
Pros & cons summary
| Physical cores | 3 | 1 |
| Threads | 3 | 1 |
| Chip lithography | 45 nm | 130 nm |
| Power consumption (TDP) | 95 Watt | 59 Watt |
Phenom II X3 720 has 200% more physical cores and 200% more threads, and a 188.9% more advanced lithography process.
Pentium 4 2.4 GHz, on the other hand, has 61% lower power consumption.
We couldn't decide between Phenom II X3 720 and Pentium 4 2.4 GHz. We've got no test results to judge.
Should you still have questions on choice between Phenom II X3 720 and Pentium 4 2.4 GHz, ask them in Comments section, and we shall answer.
Similar processor comparisons
We picked several similar comparisons of processors in the same market segment and performance relatively close to those reviewed on this page.
