Celeron Dual-Core T3000 vs A8-4500M
Primary details
Comparing A8-4500M and Celeron Dual-Core T3000 processor market type (desktop or notebook), architecture, sales start time and price.
| Place in the ranking | 2415 | not rated |
| Place by popularity | not in top-100 | not in top-100 |
| Market segment | Laptop | Laptop |
| Series | AMD A-Series | Intel Celeron Dual-Core |
| Power efficiency | 2.88 | no data |
| Architecture codename | Trinity (2012−2013) | Penryn-1M (2009) |
| Release date | 15 May 2012 (12 years ago) | 1 May 2009 (15 years ago) |
Detailed specifications
A8-4500M and Celeron Dual-Core T3000 basic parameters such as number of cores, number of threads, base frequency and turbo boost clock, lithography, cache size and multiplier lock state. These parameters indirectly say of CPU speed, though for more precise assessment you have to consider their test results.
| Physical cores | 4 (Quad-Core) | 2 (Dual-core) |
| Threads | 4 | 2 |
| Base clock speed | 1.9 GHz | no data |
| Boost clock speed | 2.8 GHz | 1.8 GHz |
| Bus rate | no data | 800 MHz |
| L1 cache | 192 KB | 64 KB |
| L2 cache | 4 MB (shared) | 1 MB |
| L3 cache | 0 KB | no data |
| Chip lithography | 32 nm | 45 nm |
| Die size | 246 mm2 | 107 mm2 |
| Maximum core temperature | no data | 105 °C |
| Number of transistors | 1,178 million | 410 Million |
| 64 bit support | + | + |
| Windows 11 compatibility | - | - |
Compatibility
Information on A8-4500M and Celeron Dual-Core T3000 compatibility with other computer components: motherboard (look for socket type), power supply unit (look for power consumption) etc. Useful when planning a future computer configuration or upgrading an existing one. Note that power consumption of some processors can well exceed their nominal TDP, even without overclocking. Some can even double their declared thermals given that the motherboard allows to tune the CPU power parameters.
| Number of CPUs in a configuration | 1 | no data |
| Socket | FS1r2 | P (478) |
| Power consumption (TDP) | 35 Watt | 35 Watt |
Technologies and extensions
Technological solutions and additional instructions supported by A8-4500M and Celeron Dual-Core T3000. You'll probably need this information if you require some particular technology.
| Instruction set extensions | 86x SSE (1, 2, 3, 3S, 4.1, 4.2, 4A),-64, AES, AVX, FMA | no data |
| AES-NI | + | - |
| FMA | + | - |
| AVX | + | - |
Virtualization technologies
Virtual machine speed-up technologies supported by A8-4500M and Celeron Dual-Core T3000 are enumerated here.
| AMD-V | + | - |
Memory specs
Types, maximum amount and channel quantity of RAM supported by A8-4500M and Celeron Dual-Core T3000. Depending on the motherboard, higher memory frequencies may be supported.
| Supported memory types | unknown | no data |
Graphics specifications
General parameters of integrated GPUs, if any.
| Integrated graphics card | AMD Radeon HD 7640G | no data |
Synthetic benchmark performance
Various benchmark results of the processors in comparison. Overall score is measured in points in 0-100 range, higher is better.
Passmark
Passmark CPU Mark is a widespread benchmark, consisting of 8 different types of workload, including integer and floating point math, extended instructions, compression, encryption and physics calculation. There is also one separate single-threaded scenario measuring single-core performance.
Cinebench 10 32-bit single-core
Cinebench R10 is an ancient ray tracing benchmark for processors by Maxon, authors of Cinema 4D. Its single core version uses just one CPU thread to render a futuristic looking motorcycle.
Cinebench 10 32-bit multi-core
Cinebench Release 10 Multi Core is a variant of Cinebench R10 using all the processor threads. Possible number of threads is limited by 16 in this version.
3DMark06 CPU
3DMark06 is a discontinued DirectX 9 benchmark suite from Futuremark. Its CPU part contains two scenarios, one dedicated to artificial intelligence pathfinding, another to game physics using PhysX package.
wPrime 32
wPrime 32M is a math multi-thread processor test, which calculates square roots of first 32 million integer numbers. Its result is measured in seconds, so that the less is benchmark result, the faster the processor.
Pros & cons summary
| Recency | 15 May 2012 | 1 May 2009 |
| Physical cores | 4 | 2 |
| Threads | 4 | 2 |
| Chip lithography | 32 nm | 45 nm |
A8-4500M has an age advantage of 3 years, 100% more physical cores and 100% more threads, and a 40.6% more advanced lithography process.
We couldn't decide between A8-4500M and Celeron Dual-Core T3000. We've got no test results to judge.
Should you still have questions on choice between A8-4500M and Celeron Dual-Core T3000, ask them in Comments section, and we shall answer.
Similar processor comparisons
We picked several similar comparisons of processors in the same market segment and performance relatively close to those reviewed on this page.
