Phenom II X3 N830 vs Celeron N6211
Aggregate performance score
Celeron N6211 outperforms Phenom II X3 N830 by a whopping 103% based on our aggregate benchmark results.
Primary details
Comparing Celeron N6211 and Phenom II X3 N830 processor market type (desktop or notebook), architecture, sales start time and price.
| Place in the ranking | 2197 | 2704 |
| Place by popularity | not in top-100 | not in top-100 |
| Cost-effectiveness evaluation | 3.33 | no data |
| Market segment | Desktop processor | Laptop |
| Series | Elkhart Lake | 3x AMD Phenom II |
| Power efficiency | 20.58 | 1.88 |
| Architecture codename | Elkhart Lake (2022) | Champlain (2010−2011) |
| Release date | 17 July 2022 (2 years ago) | 12 May 2010 (14 years ago) |
| Launch price (MSRP) | $54 | no data |
Cost-effectiveness evaluation
Performance per price, higher is better.
Detailed specifications
Celeron N6211 and Phenom II X3 N830 basic parameters such as number of cores, number of threads, base frequency and turbo boost clock, lithography, cache size and multiplier lock state. These parameters indirectly say of CPU speed, though for more precise assessment you have to consider their test results.
| Physical cores | 2 (Dual-core) | 3 (Tri-Core) |
| Threads | 2 | 3 |
| Base clock speed | 1.2 GHz | no data |
| Boost clock speed | 3 GHz | 2.1 GHz |
| Bus rate | no data | 3600 MHz |
| L2 cache | 1.5 MB | 1.5 MB |
| Chip lithography | 10 nm | 45 nm |
| Maximum core temperature | 70 °C | no data |
| 64 bit support | + | + |
| Windows 11 compatibility | + | - |
Compatibility
Information on Celeron N6211 and Phenom II X3 N830 compatibility with other computer components: motherboard (look for socket type), power supply unit (look for power consumption) etc. Useful when planning a future computer configuration or upgrading an existing one. Note that power consumption of some processors can well exceed their nominal TDP, even without overclocking. Some can even double their declared thermals given that the motherboard allows to tune the CPU power parameters.
| Socket | BGA1493 | S1 |
| Power consumption (TDP) | 6.5 Watt | 35 Watt |
Technologies and extensions
Technological solutions and additional instructions supported by Celeron N6211 and Phenom II X3 N830. You'll probably need this information if you require some particular technology.
| Instruction set extensions | no data | 86x MMX(+), 3DNow!(+), SSE(1,2,3,4A),-64, AMD-V |
| AES-NI | + | - |
| Enhanced SpeedStep (EIST) | + | no data |
Virtualization technologies
Virtual machine speed-up technologies supported by Celeron N6211 and Phenom II X3 N830 are enumerated here.
| AMD-V | - | + |
Memory specs
Types, maximum amount and channel quantity of RAM supported by Celeron N6211 and Phenom II X3 N830. Depending on the motherboard, higher memory frequencies may be supported.
| Supported memory types | DDR4 | DDR3 |
Graphics specifications
General parameters of integrated GPUs, if any.
| Integrated graphics card | Intel UHD Graphics (Jasper Lake 16 EU) | no data |
Synthetic benchmark performance
Various benchmark results of the processors in comparison. Overall score is measured in points in 0-100 range, higher is better.
Combined synthetic benchmark score
This is our combined benchmark performance rating. We are regularly improving our combining algorithms, but if you find some perceived inconsistencies, feel free to speak up in comments section, we usually fix problems quickly.
Passmark
Passmark CPU Mark is a widespread benchmark, consisting of 8 different types of workload, including integer and floating point math, extended instructions, compression, encryption and physics calculation. There is also one separate single-threaded scenario measuring single-core performance.
Cinebench 10 32-bit single-core
Cinebench R10 is an ancient ray tracing benchmark for processors by Maxon, authors of Cinema 4D. Its single core version uses just one CPU thread to render a futuristic looking motorcycle.
Cinebench 10 32-bit multi-core
Cinebench Release 10 Multi Core is a variant of Cinebench R10 using all the processor threads. Possible number of threads is limited by 16 in this version.
wPrime 32
wPrime 32M is a math multi-thread processor test, which calculates square roots of first 32 million integer numbers. Its result is measured in seconds, so that the less is benchmark result, the faster the processor.
Cinebench 11.5 64-bit multi-core
Cinebench Release 11.5 Multi Core is a variant of Cinebench R11.5 which uses all the processor threads. A maximum of 64 threads is supported in this version.
Pros & cons summary
| Performance score | 1.44 | 0.71 |
| Recency | 17 July 2022 | 12 May 2010 |
| Physical cores | 2 | 3 |
| Threads | 2 | 3 |
| Chip lithography | 10 nm | 45 nm |
| Power consumption (TDP) | 6 Watt | 35 Watt |
Celeron N6211 has a 102.8% higher aggregate performance score, an age advantage of 12 years, a 350% more advanced lithography process, and 483.3% lower power consumption.
Phenom II X3 N830, on the other hand, has 50% more physical cores and 50% more threads.
The Celeron N6211 is our recommended choice as it beats the Phenom II X3 N830 in performance tests.
Note that Celeron N6211 is a desktop processor while Phenom II X3 N830 is a notebook one.
Should you still have questions on choice between Celeron N6211 and Phenom II X3 N830, ask them in Comments section, and we shall answer.
Similar processor comparisons
We picked several similar comparisons of processors in the same market segment and performance relatively close to those reviewed on this page.
