i5-10400F vs Celeron N2940
Aggregate performance score
Core i5-10400F outperforms Celeron N2940 by a whopping 1142% based on our aggregate benchmark results.
Primary details
Comparing Celeron N2940 and Core i5-10400F processor market type (desktop or notebook), architecture, sales start time and price.
| Place in the ranking | 2758 | 926 |
| Place by popularity | not in top-100 | 9 |
| Cost-effectiveness evaluation | no data | 23.90 |
| Market segment | Laptop | Desktop processor |
| Series | Intel Celeron | no data |
| Power efficiency | 8.92 | 11.94 |
| Architecture codename | Bay Trail-M (2013−2014) | Comet Lake (2020) |
| Release date | 22 May 2014 (10 years ago) | 30 April 2020 (4 years ago) |
| Launch price (MSRP) | no data | $155 |
Cost-effectiveness evaluation
Performance per price, higher is better.
Detailed specifications
Celeron N2940 and Core i5-10400F basic parameters such as number of cores, number of threads, base frequency and turbo boost clock, lithography, cache size and multiplier lock state. These parameters indirectly say of CPU speed, though for more precise assessment you have to consider their test results.
| Physical cores | 4 (Quad-Core) | 6 (Hexa-Core) |
| Threads | 4 | 12 |
| Base clock speed | 1.83 GHz | 2.9 GHz |
| Boost clock speed | 2.25 GHz | 4.3 GHz |
| Bus rate | no data | 8 GT/s |
| L1 cache | 56K (per core) | 64K (per core) |
| L2 cache | 512K (per core) | 256K (per core) |
| L3 cache | 0 KB | 12 MB (shared) |
| Chip lithography | 22 nm | 14 nm |
| Maximum core temperature | 100 °C | 100 °C |
| Maximum case temperature (TCase) | no data | 72 °C |
| 64 bit support | + | + |
| Windows 11 compatibility | - | + |
Compatibility
Information on Celeron N2940 and Core i5-10400F compatibility with other computer components: motherboard (look for socket type), power supply unit (look for power consumption) etc. Useful when planning a future computer configuration or upgrading an existing one. Note that power consumption of some processors can well exceed their nominal TDP, even without overclocking. Some can even double their declared thermals given that the motherboard allows to tune the CPU power parameters.
| Number of CPUs in a configuration | 1 | 1 |
| Socket | FCBGA1170 | FCLGA1200 |
| Power consumption (TDP) | 7.5 Watt | 65 Watt |
Technologies and extensions
Technological solutions and additional instructions supported by Celeron N2940 and Core i5-10400F. You'll probably need this information if you require some particular technology.
| Instruction set extensions | no data | Intel® SSE4.1, Intel® SSE4.2, Intel® AVX2 |
| AES-NI | - | + |
| AVX | - | + |
| Enhanced SpeedStep (EIST) | + | + |
| Turbo Boost Technology | - | 2.0 |
| Hyper-Threading Technology | - | + |
| Idle States | + | + |
| Thermal Monitoring | - | + |
| Smart Connect | + | no data |
| Turbo Boost Max 3.0 | no data | - |
Security technologies
Celeron N2940 and Core i5-10400F technologies aimed at improving security, for example, by protecting against hacks.
| TXT | no data | + |
| EDB | + | + |
| Secure Key | + | + |
| Identity Protection | - | + |
| SGX | no data | Yes with Intel® ME |
| OS Guard | no data | + |
| Anti-Theft | - | no data |
Virtualization technologies
Virtual machine speed-up technologies supported by Celeron N2940 and Core i5-10400F are enumerated here.
| VT-d | - | + |
| VT-x | + | + |
| EPT | no data | + |
Memory specs
Types, maximum amount and channel quantity of RAM supported by Celeron N2940 and Core i5-10400F. Depending on the motherboard, higher memory frequencies may be supported.
| Supported memory types | DDR3 | DDR4 |
| Maximum memory size | 8 GB | 128 GB |
| Max memory channels | 2 | 2 |
| Maximum memory bandwidth | 21.32 GB/s | 41.6 GB/s |
Graphics specifications
General parameters of integrated GPUs, if any.
| Integrated graphics card | Intel HD Graphics for Intel Atom Processor Z3700 Series | no data |
| Quick Sync Video | + | - |
| Graphics max frequency | 854 MHz | no data |
Graphics interfaces
Available interfaces and connections of Celeron N2940 and Core i5-10400F integrated GPUs.
| Number of displays supported | 2 | no data |
Peripherals
Specifications and connection of peripherals supported by Celeron N2940 and Core i5-10400F.
| PCIe version | 2.0 | 3.0 |
| PCI Express lanes | 4 | 16 |
| USB revision | 3.0 and 2.0 | no data |
| Total number of SATA ports | 2 | no data |
| Number of USB ports | 5 | no data |
Synthetic benchmark performance
Various benchmark results of the processors in comparison. Overall score is measured in points in 0-100 range, higher is better.
Combined synthetic benchmark score
This is our combined benchmark performance rating. We are regularly improving our combining algorithms, but if you find some perceived inconsistencies, feel free to speak up in comments section, we usually fix problems quickly.
Passmark
Passmark CPU Mark is a widespread benchmark, consisting of 8 different types of workload, including integer and floating point math, extended instructions, compression, encryption and physics calculation. There is also one separate single-threaded scenario measuring single-core performance.
GeekBench 5 Single-Core
GeekBench 5 Single-Core is a cross-platform application developed in the form of CPU tests that independently recreate certain real-world tasks with which to accurately measure performance. This version uses only a single CPU core.
GeekBench 5 Multi-Core
GeekBench 5 Multi-Core is a cross-platform application developed in the form of CPU tests that independently recreate certain real-world tasks with which to accurately measure performance. This version uses all available CPU cores.
Cinebench 10 32-bit single-core
Cinebench R10 is an ancient ray tracing benchmark for processors by Maxon, authors of Cinema 4D. Its single core version uses just one CPU thread to render a futuristic looking motorcycle.
Cinebench 10 32-bit multi-core
Cinebench Release 10 Multi Core is a variant of Cinebench R10 using all the processor threads. Possible number of threads is limited by 16 in this version.
wPrime 32
wPrime 32M is a math multi-thread processor test, which calculates square roots of first 32 million integer numbers. Its result is measured in seconds, so that the less is benchmark result, the faster the processor.
Cinebench 11.5 64-bit multi-core
Cinebench Release 11.5 Multi Core is a variant of Cinebench R11.5 which uses all the processor threads. A maximum of 64 threads is supported in this version.
Cinebench 15 64-bit multi-core
Cinebench Release 15 Multi Core is a variant of Cinebench R15 which uses all the processor threads.
Cinebench 15 64-bit single-core
Cinebench R15 (standing for Release 15) is a benchmark made by Maxon, authors of Cinema 4D. It was superseded by later versions of Cinebench, which use more modern variants of Cinema 4D engine. The Single Core version (sometimes called Single-Thread) only uses a single processor thread to render a room full of reflective spheres and light sources.
Cinebench 11.5 64-bit single-core
Cinebench R11.5 is an old benchmark by Maxon, authors of Cinema 4D. It was superseded by later versions of Cinebench, which use more modern variants of Cinema 4D engine. The Single Core version loads a single thread with ray tracing to render a glossy room full of crystal spheres and light sources.
x264 encoding pass 2
x264 Pass 2 is a slower variant of x264 video compression that produces a variable bit rate output file, which results in better quality since the higher bit rate is used when it is needed more. Benchmark result is still measured in frames per second.
x264 encoding pass 1
x264 version 4.0 is a video encoding benchmark uses MPEG 4 x264 compression method to compress a sample HD (720p) video. Pass 1 is a faster variant that produces a constant bit rate output file. Its result is measured in frames per second, which means how many frames of the source video file were encoded per second.
Pros & cons summary
| Performance score | 0.66 | 8.20 |
| Recency | 22 May 2014 | 30 April 2020 |
| Physical cores | 4 | 6 |
| Threads | 4 | 12 |
| Chip lithography | 22 nm | 14 nm |
| Power consumption (TDP) | 7 Watt | 65 Watt |
Celeron N2940 has 828.6% lower power consumption.
i5-10400F, on the other hand, has a 1142.4% higher aggregate performance score, an age advantage of 5 years, 50% more physical cores and 200% more threads, and a 57.1% more advanced lithography process.
The Core i5-10400F is our recommended choice as it beats the Celeron N2940 in performance tests.
Be aware that Celeron N2940 is a notebook processor while Core i5-10400F is a desktop one.
Should you still have questions on choice between Celeron N2940 and Core i5-10400F, ask them in Comments section, and we shall answer.
Similar processor comparisons
We picked several similar comparisons of processors in the same market segment and performance relatively close to those reviewed on this page.
